Bicystar 16" Balance Bike Assembly Guide | Model KB-BMX01

Bicystar 16" Balance Bike Assembly Guide | Model KB-BMX01

Welcome to the world of Bicystar, where every adventure begins with the perfect bike! We're excited to help you get started with your new 16-inch balance bike. This blog post is designed to complement our YouTube assembly guide video, ensuring you have all the information you need for a smooth and successful assembly.

What You'll Need

Here’s a quick rundown of the parts included in your Bicystar balance bike package:
  • A. Handlebar
  • B. Seat
  • C. Front Wheel
  • D. Frame with Fork & Rear Wheel
  • E. Kickstand
  • F. Assembly Tools
  • G. Handlebar Pad

Step-by-Step Assembly Guide

Step 1: Installing the Handlebar

The handlebar is the first part to be installed. Insert the handlebar into the head tube at least 2 inches deep, ensuring proper alignment. Fasten the screw in the middle position of the handlebar by turning it clockwise to hold the handlebar securely in place. Finally, wrap the soft handlebar pad around the center of the handlebar and fasten it securely with the velcro. This pad not only adds comfort but also ensures safety during use.

Step 2: Attaching the Front Wheel

First, remove the axle bolts and retention devices from the front wheel. Insert the wheel axle between the fork tubes so that the axle fits into the slots at the end of the fork blades. Install the axle retention devices and the axle bolts on each side of the axle. Use the adjustable wrench provided to tighten the axle bolts securely. Ensuring the wheel is tightly attached prevents any wobbles or unsafe rides.

Step 3: Installing the Seat

Next, insert the seat post into the frame. Fasten the seat clamp by turning the screw clockwise until snug, then press the lever down to lock the seat in place. A secure seat is essential for your child’s comfort and safety during rides.

Step 4: Installing the Kickstand

Position the kickstand on the frame where it is designed to be installed. Fasten the kickstand by securing the two screws, ensuring they are tightened securely. The kickstand allows for easy parking and storage of the bike.

Adjusting the Seat Height

As your child grows, you’ll need to adjust the seat height. Release the lever on the seat clamp and turn the screw counter-clockwise to loosen the seat post. Adjust the seat height, making sure at least 2.5 inches of the seat tube is inside the seat post. Fasten the seat clamp by turning the screw clockwise until snug, then press the lever down to lock the seat in place.

Conclusion

Assembling your Bicystar 16-inch balance bike is a straightforward process that can be completed in just a few steps. With this guide and our video tutorial, you'll have your bike ready in no time, ensuring your child can start their biking adventures safely and confidently.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.