Bicystar Bassinet Bedside Sleeper Assembly Guide | Model TX-BN001

Bicystar Bassinet Bedside Sleeper Assembly Guide | Model TX-BN001


Setting up a safe and comforting sleeping space for your newborn is one of the first major tasks as a new parent. The Bicystar Bassinet Bedside Sleeper, Model TX-BN001, not only offers a secure environment for your baby but also ensures that they are as close to you as possible throughout the night. However, understanding the importance of proper assembly and use is crucial for your baby’s safety and your peace of mind. This blog will guide you through each step, from unboxing to safely positioning your baby for sleep.

Before We Begin

Adult assembly is required for the Bicystar Bassinet Bedside Sleeper, and it's important to keep small parts away from children during the setup. Note that styles and colors may vary, but safety and comfort never do. Adhering to the warnings and instructions is vital to prevent serious injury or even death. From ensuring every piece is securely fastened without substitutions to the correct placing of your baby for sleep, every detail counts.

Unboxing and Assembly

Upon opening your package, you'll find the crib frame with cover, supporting base, lower supporting frames, mattress with cover, nursery organization caddy, protective mosquito net, storage compartment, and user manual. Discard all packaging materials immediately to eliminate suffocation and choking hazards.

Steps to Assemble:

  1. Unfold the Crib Frame Legs: Start by spreading out the crib frame legs as illustrated in your manual.
  2. Insert the Supporting Base: Place the supporting base into the center position of the unfolded leg structure.
  3. Install the Lower Frames: Attach the lower supporting frames to the base of the leg positions.
  4. Place and Secure Mattress: Fit the mattress inside the crib and fasten it securely by attaching the Velcro under the crib's cover to the supporting base.
  5. Attach the Storage Compartments: Finally, add the lower storage compartment to the lower supporting frame using the Velcro strap for added stability.

Height Adjustment for Safety and Comfort

The bassinet comes with six customizable height levels to match the height of your bed, ensuring there's no gap and maintaining the safety of your baby through the night. WARNING: Never exceed a differential of two levels between one side and the other.

Transitioning to Bedside Bassinet Mode

For parents who prefer having their baby at an arm’s reach, the bedside bassinet mode is ideal. Unzip the indicated section of the side wall, detach the top tube of the side wall frame on both sides, adjust the bassinet to your bed level, and ensure the wheels are locked to prevent movement.

Commitment to Your Baby’s Safety

While assembly might appear straightforward, the commitment to regularly checking for damaged hardware, loose components, or sharp edges should not be underestimated. Stop using the product once your child can sit up, roll over, or leave the walled area unassisted.

FALL HAZARD and SUFFOCATION HAZARD are real concerns. Adhere strictly to the guidelines regarding the use of the pad provided and avoid adding pillows, comforters, or additional mattresses for padding.

Final Thoughts

Assembling the Bicystar Bassinet Bedside Sleeper, Model TX-BN001, is more than just following a set of instructions; it's the first of many steps you'll take to ensure the safety and well-being of your child. Always bear in mind the risks associated with improper use or assembly, and ensure you undertake this task with the utmost care and attention to detail. Remember, the safest sleeping environment is one that has been thoughtfully set up and regularly inspected.

Your baby's safety is your responsibility. Embrace it with love, care, and diligence.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.